XTS 2618 Motor series

Xnova XTS 2618-1360kv

Xnova brushless high performance outrunner motor designed for extrem 3D, 320-360mm bladesize helicopter where highest power to weight ratio is important. Protos 450 stretch, compass WARP-360 and so on. On Protos 450 small frame modifications will be necesarry. On WARP-360 please use 3.17mm pinion and enlarge inner diameter to 3.5mm.

  1. High quality Neodym Magnets. Heat resistant up to 150 degrees C.
  2. Specialized wires,heat resistant up to 250 degrees C.
  3. Precisely balanced.
  4. High performance sheet metal stator.
  5. High quality NMB bearings.
  6. Market leading effiency up to 88%.
  7. Cooler running.
  8. Superb quality and machining of CNC parts.
  9. Improved torque and power output.

( Aditionally information:  Recommeded ESC for  2618 series ; YGE-60A ; HW 50A Platinum V3 )


Xnova XTS 2618-1580kv

Xnova brushless high performance outrunner motor designed for extrem 3D, 320-360mm bladesize helicopter where highest power to weight ratio is important.

  1. High quality Neodym Magnets. Heat resistant up to 150 degrees C.
  2. Specialized wires,heat resistant up to 250 degrees C.
  3. Precisely balanced.
  4. High performance sheet metal stator.
  5. High quality NMB bearings.
  6. Market leading effiency up to 88%.
  7. Cooler running.
  8. Superb quality and machining of CNC parts.
  9. Improved torque and power output.

( Aditionally information:  Recommeded ESC for  2618 series ; YGE-60A ; HW 50A Platinum V3 )


Xnova XTS 2618-1860kv

Xnova brushless high performance outrunner motor designed for extrem 3D, 320-360mm bladesize helicopter where highest power to weight ratio is important. Gaui X3, KDS-CHASE-360, T-rex 450 , (at some type of helicopter small frame modifications may be necessary).

  1. High quality Neodym Magnets. Heat resistant up to 150 degrees C.
  2. Specialized wires,heat resistant up to 250 degrees C.
  3. Precisely balanced.
  4. High performance sheet metal stator.
  5. High quality NMB bearings.
  6. Market leading effiency up to 88%.
  7. Cooler running.
  8. Superb quality and machining of CNC parts.
  9. Improved torque and power output.

( Aditionally information:  Recommeded ESC for  2618 series ; YGE-60A ; HW 50A Platinum V3 )