Xnova 4025-1120KV 1.5Y
500-620 size helicopters for extremely hard 3d flying on 6s.
SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B, C
If V3 version is stated on the packing and engrave on fancover = new front case (please see datasheet)
| Slots & Poles | 24n8p |
| Winding T | 1.5Y |
| rpm/V | 1120 |
| Volt (V) | 10 | 20 | 25 |
| Io(A) | 2.7 | 3.2 | 3.6 |
| Rm (mohm) | 7.3 | 7.3 | 7.3 |
| Weight (without connector) (g) | 384 |
| Body Length (no shaft) mm | 55.75 |
| Diameter (mm) | 49.5 |
| Shaft Length (mm) (Details pictures) | 36 | 28 (Goblin 570) |
| Shaft Dia. (mm) | 6/5 |
| Mounting Holes CTC Distance (mm) | NEW! from V3 = 4*M3 in 25mm and 4*M4 in 30mm |
| Mounting Screw | NEW! from V3 = M3 and M4 |
| Max Eff. Curr. | 60.82 | 93.63 | 111.03 |
| Max Eff. | 91.12 | 93.16 | 93.52 |
| Kt (Nm/A | 0.0085 |
| Km (Nm/sqrt(w)) | 0.0998 |
| Max Continuous Power(Watts) | 3000 |
| Peak Continuous Power(Watts) (5 sec) | 4000 |
| Max cont. current (A) | 110 |