Xnova XTS 2618-1860kv 10P
Designed for extrem 3D , 320-360mm bladesize helicopter where highest power to weight ratio is important.
SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A,B,C
| Slots & Poles | 12n10p |
| Winding T | 10D |
| rpm/V | 1860 |
| Volt (V) | 10 / 22.2 |
| Io(A) | 2.5 / 4.2 |
| Rm (mohm) | 15 |
| Weight (without connector) (g) | 110 |
| Body Length (no shaft) mm | 38.1 |
| Diameter (mm) | 33 |
| Shaft Length (mm) (Details pictures) | A,B,C |
| Shaft Dia. (mm) | A=3.5 / B=3 |
| Mounting Holes CTC Distance (mm) | 19*2 & 16*2 |
| Mounting Screw | M3x0.5 |
| Max Eff. Curr. | 40.82 / 78.84 |
| Max Eff. | 87.75 / 89.35 |
| Kt (Nm/A | 0.0051 |
| Km (Nm/sqrt(w)) | 0.0419 |
| Max Continuous Power(Watts) | 900 |
| Peak Continuous Power(Watts) (2 sec) | 1200 |
| Max Continuous Current(Amps) | 45 |