LIGHTNING 2820, 3215 Tareq and 32XX Motor series

NEW! Xnova Ligtning 2820-920kv

We have spent hours of testing to improve the very well established and known 2820 xts motor. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for hard 3D, running in 360-380mm bladesize helicopter where highest power to weight ratio is important.

  1. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V920
Volt (V)10 / 22.2
Io(A)1.8 / 2.8
Rm (mohm)28 / 28
Weight (without connector) (g)150
Body Length (no shaft) mm40.7
Diameter (mm)36
Shaft Length (mm) (Details pictures)All in one
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.25.35 / 47.12
Max Eff.85.80 / 88.11
Kt (Nm/A0.0104
Km (Nm/sqrt(w))0.0620
Max Continuous Power(Watts)1150
Peak Continuous Power(Watts) (2 sec)1450
Max Continuous Current(Amps)52

NEW! Xnova TAREQ EDITION 3215-945KV V2

We have spent alot of time for testing to improve the very well established and known TAREQ EDITION 3215 motor. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 360-380mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V945
Volt (V)10 / 22.2
Io(A)1.4 / 2.4
Rm (mohm)24 / 24
Weight (without connector) (g)166
Body Length (no shaft) mm40
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)All in one
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.24.15 / 47.12
Max Eff.88.41 / 89.81
Kt (Nm/A0.0101
Km (Nm/sqrt(w))0.0652
Max Continuous Power(Watts)1350
Peak Continuous Power(Watts) (2 sec)1800
Max Continuous Current(Amps)60

NEW! Xnova 3220-950kv Lighning

The 3220 lightning is a brand new powerhouse. Any helicopter asking for insane power swinging 380-420mm blades will be supperhappy with this masterpiece. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 380-420mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V950
Volt (V)10 / 22.2
Io(A)1.8 / 3.0
Rm (mohm)18 / 18
Weight (without connector) (g)200
Body Length (no shaft) mm45
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)A or B
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.31.62 / 60.83
Max Eff.88.62 / 90.14
Kt (Nm/A0.0101
Km (Nm/sqrt(w))0.0749
Max Continuous Power(Watts)1450
Peak Continuous Power(Watts) (2 sec)1900
Max Continuous Current(Amps)66

NEW! Xnova 3225-1100kv Lightning motor

The 3225 lightning is a brand new powerhouse. Any helicopter asking for insane power swinging 420-500mm blades will be supperhappy with this masterpiece. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 420-5000mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V1100
Volt (V)10 / 22.2
Io(A)3.1 / 5.1
Rm (mohm)10 / 10
Weight (without connector) (g)240
Body Length (no shaft) mm50
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)A
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.55.68 / 106.40
Max Eff.88.86 / 90.41
Kt (Nm/A0.0087
Km (Nm/sqrt(w))0.0868
Max Continuous Power(Watts)1900
Peak Continuous Power(Watts) (2 sec)2500
Max Continuous Current(Amps)86