Xnova 50XX TAREQ_special_edition motor specifications

Xnova 50XX TAREQ_special_edition motor

Designed specially for the new Logo 800 size helicopter,where highest power to weight ratio is important. Developed and tested with Tareq Alsaadi.

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A,B

LIGHTNING 2820, 3215 Tareq and 32XX Motor series

NEW! Xnova Ligtning 2820-920kv

We have spent hours of testing to improve the very well established and known 2820 xts motor. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for hard 3D, running in 360-380mm bladesize helicopter where highest power to weight ratio is important.

  1. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V920
Volt (V)10 / 22.2
Io(A)1.8 / 2.8
Rm (mohm)28 / 28
Weight (without connector) (g)150
Body Length (no shaft) mm40.7
Diameter (mm)36
Shaft Length (mm) (Details pictures)All in one
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.25.35 / 47.12
Max Eff.85.80 / 88.11
Kt (Nm/A0.0104
Km (Nm/sqrt(w))0.0620
Max Continuous Power(Watts)1150
Peak Continuous Power(Watts) (2 sec)1450
Max Continuous Current(Amps)52

NEW! Xnova TAREQ EDITION 3215-945KV V2

We have spent alot of time for testing to improve the very well established and known TAREQ EDITION 3215 motor. The result is an even better overall performing motor and increased efficiency. This all will provide you a cooler running motor and also more consistent power delivery over the full flight.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 360-380mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V945
Volt (V)10 / 22.2
Io(A)1.4 / 2.4
Rm (mohm)24 / 24
Weight (without connector) (g)166
Body Length (no shaft) mm40
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)All in one
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.24.15 / 47.12
Max Eff.88.41 / 89.81
Kt (Nm/A0.0101
Km (Nm/sqrt(w))0.0652
Max Continuous Power(Watts)1350
Peak Continuous Power(Watts) (2 sec)1800
Max Continuous Current(Amps)60

NEW! Xnova 3220-950kv Lighning

The 3220 lightning is a brand new powerhouse. Any helicopter asking for insane power swinging 380-420mm blades will be supperhappy with this masterpiece. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 380-420mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V950
Volt (V)10 / 22.2
Io(A)1.8 / 3.0
Rm (mohm)18 / 18
Weight (without connector) (g)200
Body Length (no shaft) mm45
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)A or B
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.31.62 / 60.83
Max Eff.88.62 / 90.14
Kt (Nm/A0.0101
Km (Nm/sqrt(w))0.0749
Max Continuous Power(Watts)1450
Peak Continuous Power(Watts) (2 sec)1900
Max Continuous Current(Amps)66

NEW! Xnova 3225-1100kv Lightning motor

The 3225 lightning is a brand new powerhouse. Any helicopter asking for insane power swinging 420-500mm blades will be supperhappy with this masterpiece. The Xnova lightning series is the highest level of motor performance money can buy nowadays.

Xnova brushless high performance outrunner motor designed for extreme hard 3D, running in 420-5000mm bladesize helicopter where highest power to weight ratio is important.At the same time this motor is also extreme efficient!

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by use of thicker hand wound YY single strand copper wires, heat resistant up to 250 degrees C.
  3. New type of high-performance neodymium magnets, heat resistant up to 150 degrees C resulting in overall better performance.
  4. 100% handwound.
Slots & Poles12n10p
Winding TYY
rpm/V1100
Volt (V)10 / 22.2
Io(A)3.1 / 5.1
Rm (mohm)10 / 10
Weight (without connector) (g)240
Body Length (no shaft) mm50
Diameter (mm)40.5
Shaft Length (mm) (Details pictures)A
Shaft Dia. (mm)5
Mounting Holes CTC Distance (mm)25
Mounting ScrewM3x0.5
Max Eff. Curr.55.68 / 106.40
Max Eff.88.86 / 90.41
Kt (Nm/A0.0087
Km (Nm/sqrt(w))0.0868
Max Continuous Power(Watts)1900
Peak Continuous Power(Watts) (2 sec)2500
Max Continuous Current(Amps)86

NEW AIRPLANE MOTOR SERIES

NEW! Xnova 3640 inrunner airplane motor series. Made for SAB TORTUGA

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees
  • Inovative propeller adapter shaft

 


NEW! Xnova 3645 inrunner airplane motor series. SAB TORTUGA TUNING SERIES

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees
  • Inovative propeller adapter shaft
  • Optimised for SAB Tortuga as a tuning upgrade over the 3640

 


NEW! Xnova 3650 inrunner airplane motor series.

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees

 


NEW! Xnova 3660 inrunner airplane motor series.

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees

 


NEW! Xnova 3665 inrunner airplane motor series.

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees

 


NEW! Xnova 3675 inrunner airplane motor series.

  • Superb quality
  • Optimized stator design with thinner lamination
  • Ultra efficient
  • Carbon fiber wrapped rotor
  • Extremely solid at any rpm
  • Higher quality grade magnets with heat resistance up to 180 degrees

 


NEW! XTAREQ HIGH-END MOTOR

NEW! XTAREQ 700 class high-end motor

Tareq Alsaadi, legend and a mentor in the RC helicopter scene. For years we have worked with him for the idea to develope the most unique, powerful and strongest motor ever. A motor which have absolute no room left for any kind of improvements by the use of the very best components the industrie can provide. 3 bearings, the most advanced stator design with the highest copper filling grade you can come up with and a finninshing you never seen before.

Even in comparison versus a swiss highend clock this juwel not need to be fear of.

Xnova brushless high performance outrunner motor designed for extrem 3D performance in 690-710mm helicopter where highest power to weight ratio is important.

  1. Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
  2. Increased power output by the use of thicker hand wound YY single strand copper wires, heat resistant up to 300 degrees C.
  3. High-performance latest type neodymium magnets, heat resistant up to 180 degrees C.
  4. 3D machined xtareq logo on fancover,with amayzing clean and stylish look.
  5. Developed with TAREQ ALSAADI and 100% approved by him to be the most powerful and solid motor he ever used.
  6. Highest copper filling grade that is possible
  7. 550KV/V and 560 gramms wo/w