Xnova LIGHTNING 4030-1000KV specifications

Xnova LIGHTNING 4030-1.5Y-1000KV 

Specially designed for the SAB Raw 700 PIUMA. For operation on 6S (20T motor pulley) or 7S (18T or 19T motor pulley).
100% hand-wound!

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B

Xnova LIGHTNING 4030-710KV specifications

Xnova LIGHTNING 4030-2Y-710KV 

For helicopters with a blade length of 570 to 630 mm and operation with 10S LiPos (hard 3D). This motor achieves its highest efficiency at approx. 90A at 10S.
100% hand-wound! 

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B

Xnova LIGHTNING 4030-470KV specifications

Xnova LIGHTNING 4030-3Y-470KV 

For helicopters with a blade length of 570 to 630 mm and operation with 12 to 14S LiPos (3D) or 10S LiPos with long flight times and high efficiency.
100% hand-wound! 

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B

Xnova LIGHTNING 4030-560KV specifications

Xnova LIGHTNING 4030-2.5Y-560KV 

570-630 size helicopters for hard 3d flying on 10-12s, such as SAB Kraken and Raw 580
Also suitable for "mid-power setups" in light 700 helis, e.g. B. Diabolo UL from Minicopter or the SEVEN from PSG Dynamics or SAB Raw 700 Piuma.
Peak efficiency occurs at ~65A on 10s .
100% hand-wound! 

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B

Xnova LIGHTNING 4030-350KV specifications

Xnova LIGHTNING 4030-4Y-350KV 

Designed for AP work in 570-700mm 10-12s helicopters where power draw is very consistent.
100% hand-wound!

SHAFT TYPE SELECTION BASED ON THE ILLUSTRATION BELOW A, B